Solution Description
DESCRIPTION
Craft | forging |
Design | P100-P260 |
Materials | 40Cr(hardness thirty-37HRC),35CrMo(hardness38-42HRC), 42CrMo(hardness38-42HRC),20CrMnTi(carburization:45-55HRC,Carburized layer0.35-.55mm) |
Production capacity | 120000 items/thirty day period |
OEM/ODM | Offered |
Heat remedy | Mesh belt ongoing operation furnace, stable top quality |
Tests strategy | Hardness tests,Mechanical functionality tests,Affect check, Magnetic particle inspection |
Model | P | T | t | h | H | b | d |
S16 | one hundred | thirty | 15 | 27 | 8 | 16 | 14 |
Z16 | a hundred | forty | 18 | 35 | twelve | twenty | seventeen |
S20 | a hundred twenty five | 34 | 16 | 33 | ten | eighteen | seventeen |
Z20 | one hundred twenty five | 50 | 24 | forty eight | fifteen | 26 | twenty |
S30 | 142 | 46 | 22 | 49 | 14 | 23.5 | 25 |
Z30 | 142 | 64 | 28.5 | 50 | eighteen | 30.five | 25 |
142N | 142 | 43 | 19 | 50 | twelve.2 | 21 | twenty five |
YD315 | 142 | sixty | 28 | fifty | 15 | 30 | 25 |
X3001 | 142 | 35 | 15 | forty | thirteen | seventeen | 18 |
3001 | 142 | 50 | 23 | forty | twelve | 25 | 21 |
G261A 142N | 142 | 43 | 19 | 50 | 13 | 21 | 25 |
G262A | 142 | 62 | 29 | 51 | sixteen | thirty | twenty five |
142STD A-1106 | 142 | forty three | twenty | 52.five | 13 | 21 | 25 |
142HVY A-1110 | 142 | 62 | 28.five | 50 | 16 | 30 | twenty five |
142X50X19 | 142 | 42 | 18.five | 50 | 13 | 20 | 25 |
142X55X29 | 142 | 62 | 28.5 | 55 | 15.5 | thirty | 25 |
a hundred and fifty | a hundred and fifty | 38 | 18 | forty | ten | 20 | eighteen |
YD250 | 150 | 38 | eighteen | forty | ten | 19 | 18 twenty |
S25 | one hundred sixty | forty eight | 23 | 40 | thirteen | 25 | 20 |
Z25 | a hundred and sixty | 58 | 28 | 55 | 18 | 30 | 25 |
P160E | one hundred sixty | 43 | 20 | 50 | twelve | 22 | twenty five |
MS32 | 200 | 42 | 20 | fifty | 12 | 22 | 20 25 |
MS55 | two hundred | eighty | 35 | 70 | twenty five | 38 | |
YD310 | 200 | forty three | 20 | forty seven | 12 | 22 | 20 |
ML40 | 200 | forty eight | 23 | fifty eight | eighteen | twenty five | twenty five |
NJB640 | 200 | fifty two | 25 | 60 | twenty five | 28 | twenty five |
3006 | 200 | sixty five | 30 | 70 | 24 | 33 | |
MG20 | 200 | 70 | 27 | 70 | twenty | 29 | |
A-1173 | 142 | forty two | 19.5 | fifty | 13 | 21.3 | twenty five |
A-1174 | 142 | forty two | 19.five | 50 | thirteen | 21.3 | twenty five |
A-3634 | 216 | sixty four | 26 | seventy two | twenty | 28.five | 35 |
P260 | 260 | seventy two | 32 | seventy five | twenty | 34 | 32 |
X63 | 250 | sixty | 28 | 70 | twenty | thirty | twenty five |
About WXIHU (WEST LAKE) DIS.
Found in 2003,ZheJiang CZPT Precision Casting&Forging Inc. is a producer for building equipment areas such as excavator bucket enamel,bucket adapter,aspect cutter,facet protectorforged pipe clamp
for concrete pump truckdrop solid chain for scraper conveyor.
About Generation Method
we have 400T/1000T/1600T/2500T friction push equipment,a single 1250T horizontal forging and upsetting equipment,and 1 4800T Multidirectional hydraulic forging device for .1KG-50KG forgings.So we can totally make put on elements as customer’s drawing or sample.
About Quality Management
we have a QC team and inspection equipment like
chemical composition analyzer,mechanical home examination device and 3D detector and so forth.
About Additionally
Located in 2571,ZheJiang Plus Import&Export Buying and selling Co.,Ltd. is WXIHU (WEST LAKE) DIS.’s product sales organization who is dependable for overseas trade business.
Why Pick WXIHU (WEST LAKE) DIS.&In addition?
1.we are professional company for 19 a long time experience in our market.
2.we have distinct casting line and forging line for .1KG-2TONS areas.
3.we have passed qualification and good quality evaluation a lot of moments by some well-known business like
ESTI,SUNWARD,ZOOMLION,CASCADE etc.
We are in HangZhou metropolis,ZheJiang province-Hometown of the Three Gorged Dam!
Welcome to pay a visit to our factory and achievement jointly!
FAQ
Q1.Are you a manufacturer or a buying and selling organization?
we are entirely maker of machinery components.
Q2.Can i get samples for examining the top quality?
we can offer free samples,but you need to have to pay the freight.
Q3.What’s your MOQ?
For typical prodcuts,we don’t have MOQ.
For customerized items,we will inform you MOQ dependent on your drawing.
This fall.What’s your shipping time?
it’s about 7-forty five days based on your amount.
Q5.What’s your payment phrases?
QuantityAmount≥5000USD,T/T 30% as deposit,stability prior to shipping.
Q6.Can i go to your manufacturing unit?
we often welcome you to visit our factory.
You can can consider air airplane to SANXIA airport or get higher-pace rail to HangZhou station,
we will decide you up in advance.
Q7.What variety of items do you provide?
We largely produce excavator bucket tooth such as casting tooth and forging tooth
drop solid chain for scraper conveyorforged pipe clamp for concrete pumpnew patented
one particular piece casting bucket&ripperand we can also make .1KG-2TONS components as your drawing or sample.
Q8.How lengthy should we consider a quotation?
Following obtaining comprehensive details,we will quotation you inside 24 hrs.
Q9.How about the high quality?
We can make according to customer’s necessity,these kinds of as chemical composition and mechanical residence.
we are provider for ESTI,SUNWARD,ZOOMLION,these renowned manufacturer and many others.
Q10.How about the guarantee?
we guarantee all our spare parts in opposition to breakage.
if any of these elements crack beneath standard working circumstances we will supply a new part free of charge of demand.
US $5 / Piece | |
100 Pieces (Min. Order) |
###
Condition: | New |
---|---|
Certification: | CE, ISO9001 |
Standard: | ASTM |
Customized: | Customized |
Material: | Alloy |
Application: | Metal Processing Machinery Parts, Metal Forging Machinery |
###
Samples: |
US$ 100/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Craft | forging |
Model | P100-P260 |
Material | 40Cr(hardness 30-37HRC),35CrMo(hardness38-42HRC), 42CrMo(hardness38-42HRC),20CrMnTi(carburization:45-55HRC,Carburized layer0.35-0.55mm) |
Production capacity | 120000 pieces/month |
OEM/ODM | Available |
Heat treatment | Mesh belt continuous operation furnace, stable quality |
Testing method | Hardness testing,Mechanical performance testing,Impact test, Magnetic particle inspection |
###
###
###
###
###
###
MODEL | P | T | t | h | H | b | d |
S16 | 100 | 30 | 15 | 27 | 8 | 16 | 14 |
Z16 | 100 | 40 | 18 | 35 | 12 | 20 | 17 |
S20 | 125 | 34 | 16 | 33 | 10 | 18 | 17 |
Z20 | 125 | 50 | 24 | 48 | 15 | 26 | 20 |
S30 | 142 | 46 | 22 | 49 | 14 | 23.5 | 25 |
Z30 | 142 | 64 | 28.5 | 50 | 18 | 30.5 | 25 |
142N | 142 | 43 | 19 | 50 | 12.2 | 21 | 25 |
YD315 | 142 | 60 | 28 | 50 | 15 | 30 | 25 |
X3001 | 142 | 35 | 15 | 40 | 13 | 17 | 18 |
3001 | 142 | 50 | 23 | 40 | 12 | 25 | 21 |
G261A 142N | 142 | 43 | 19 | 50 | 13 | 21 | 25 |
G262A | 142 | 62 | 29 | 51 | 16 | 30 | 25 |
142STD A-1106 | 142 | 43 | 20 | 52.5 | 13 | 21 | 25 |
142HVY A-1110 | 142 | 62 | 28.5 | 50 | 16 | 30 | 25 |
142X50X19 | 142 | 42 | 18.5 | 50 | 13 | 20 | 25 |
142X55X29 | 142 | 62 | 28.5 | 55 | 15.5 | 30 | 25 |
150 | 150 | 38 | 18 | 40 | 10 | 20 | 18 |
YD250 | 150 | 38 | 18 | 40 | 10 | 19 | 18 20 |
S25 | 160 | 48 | 23 | 40 | 13 | 25 | 20 |
Z25 | 160 | 58 | 28 | 55 | 18 | 30 | 25 |
P160E | 160 | 43 | 20 | 50 | 12 | 22 | 25 |
MS32 | 200 | 42 | 20 | 50 | 12 | 22 | 20 25 |
MS55 | 200 | 80 | 35 | 70 | 25 | 38 | 28 30 33 35 |
YD310 | 200 | 43 | 20 | 47 | 12 | 22 | 20 |
ML40 | 200 | 48 | 23 | 58 | 18 | 25 | 25 |
NJB640 | 200 | 52 | 25 | 60 | 25 | 28 | 25 |
3006 | 200 | 65 | 30 | 70 | 24 | 33 | 28 30 32 |
MG20 | 200 | 70 | 27 | 70 | 20 | 29 | 28 30 35 |
A-1173 | 142 | 42 | 19.5 | 50 | 13 | 21.3 | 25 |
A-1174 | 142 | 42 | 19.5 | 50 | 13 | 21.3 | 25 |
A-3634 | 216 | 64 | 26 | 72 | 20 | 28.5 | 35 |
P260 | 260 | 72 | 32 | 75 | 20 | 34 | 32 |
X63 | 250 | 60 | 28 | 70 | 20 | 30 | 25 |
US $5 / Piece | |
100 Pieces (Min. Order) |
###
Condition: | New |
---|---|
Certification: | CE, ISO9001 |
Standard: | ASTM |
Customized: | Customized |
Material: | Alloy |
Application: | Metal Processing Machinery Parts, Metal Forging Machinery |
###
Samples: |
US$ 100/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Craft | forging |
Model | P100-P260 |
Material | 40Cr(hardness 30-37HRC),35CrMo(hardness38-42HRC), 42CrMo(hardness38-42HRC),20CrMnTi(carburization:45-55HRC,Carburized layer0.35-0.55mm) |
Production capacity | 120000 pieces/month |
OEM/ODM | Available |
Heat treatment | Mesh belt continuous operation furnace, stable quality |
Testing method | Hardness testing,Mechanical performance testing,Impact test, Magnetic particle inspection |
###
###
###
###
###
###
MODEL | P | T | t | h | H | b | d |
S16 | 100 | 30 | 15 | 27 | 8 | 16 | 14 |
Z16 | 100 | 40 | 18 | 35 | 12 | 20 | 17 |
S20 | 125 | 34 | 16 | 33 | 10 | 18 | 17 |
Z20 | 125 | 50 | 24 | 48 | 15 | 26 | 20 |
S30 | 142 | 46 | 22 | 49 | 14 | 23.5 | 25 |
Z30 | 142 | 64 | 28.5 | 50 | 18 | 30.5 | 25 |
142N | 142 | 43 | 19 | 50 | 12.2 | 21 | 25 |
YD315 | 142 | 60 | 28 | 50 | 15 | 30 | 25 |
X3001 | 142 | 35 | 15 | 40 | 13 | 17 | 18 |
3001 | 142 | 50 | 23 | 40 | 12 | 25 | 21 |
G261A 142N | 142 | 43 | 19 | 50 | 13 | 21 | 25 |
G262A | 142 | 62 | 29 | 51 | 16 | 30 | 25 |
142STD A-1106 | 142 | 43 | 20 | 52.5 | 13 | 21 | 25 |
142HVY A-1110 | 142 | 62 | 28.5 | 50 | 16 | 30 | 25 |
142X50X19 | 142 | 42 | 18.5 | 50 | 13 | 20 | 25 |
142X55X29 | 142 | 62 | 28.5 | 55 | 15.5 | 30 | 25 |
150 | 150 | 38 | 18 | 40 | 10 | 20 | 18 |
YD250 | 150 | 38 | 18 | 40 | 10 | 19 | 18 20 |
S25 | 160 | 48 | 23 | 40 | 13 | 25 | 20 |
Z25 | 160 | 58 | 28 | 55 | 18 | 30 | 25 |
P160E | 160 | 43 | 20 | 50 | 12 | 22 | 25 |
MS32 | 200 | 42 | 20 | 50 | 12 | 22 | 20 25 |
MS55 | 200 | 80 | 35 | 70 | 25 | 38 | 28 30 33 35 |
YD310 | 200 | 43 | 20 | 47 | 12 | 22 | 20 |
ML40 | 200 | 48 | 23 | 58 | 18 | 25 | 25 |
NJB640 | 200 | 52 | 25 | 60 | 25 | 28 | 25 |
3006 | 200 | 65 | 30 | 70 | 24 | 33 | 28 30 32 |
MG20 | 200 | 70 | 27 | 70 | 20 | 29 | 28 30 35 |
A-1173 | 142 | 42 | 19.5 | 50 | 13 | 21.3 | 25 |
A-1174 | 142 | 42 | 19.5 | 50 | 13 | 21.3 | 25 |
A-3634 | 216 | 64 | 26 | 72 | 20 | 28.5 | 35 |
P260 | 260 | 72 | 32 | 75 | 20 | 34 | 32 |
X63 | 250 | 60 | 28 | 70 | 20 | 30 | 25 |
Roller Chain Maintenance Tips
There are many things to keep in mind when maintaining a roller chain. The main reasons include friction and external influences. Without proper lubrication and adjustment, such chains will wear prematurely. Here are some tips for keeping your roller chain in top shape. continue reading! This will make your process easier. We will also discuss the cost of the new roller chain. As always, remember to check for loose ends and adjust the chain regularly.
Preloading
Roller chains are designed to accommodate many different types of loads. Sprockets are the main cause of chain wear. Axial and angular misalignment occurs when the sprocket faces are not properly aligned. Both types of misalignment increase stress and wear on the roller chain. They can also negatively affect the drive. Therefore, choosing the right chain is an important consideration.
Preloading helps to eliminate initial elongation and extend service life. The benefits of preloading can be seen in the preloading chart. Significant elongation occurs during drive startup with no or minimal preload. This is due to the surface hardness of the worn parts. On the other hand, a properly preloaded chain shows little elongation during the initial start. Therefore, proper preload can prolong wear life.
Although elongation is a natural phenomenon in any drive, it can be minimized or eliminated with proper maintenance. In addition to regular inspections, you should do a full inspection of your chain after the first hundred hours. This inspection should focus on key life factors such as 3% elongation, how the chain is lubricated, and any other issues that may affect life. A good quality chain should have the longest life and no problems.
There are many different roller chain specifications. A good rule of thumb is to choose chains with at least five links. Then, tighten the chain until a break occurs, and it will tell you what kind of break occurred. Alternatively, you can use a roller chain with the maximum allowable load. As long as the MAL doesn’t exceed that number, it’s still perfectly safe to use it for any application.
lubricating
When it comes to lubrication, there are several different techniques. For example, spray lubrication is a popular method for high-horsepower drives and high-load and fast-moving machines. This method is very effective, but it is expensive, and spraying the chain too far out of the guard can cause leaks. Another common method is brush lubrication. Brush lubrication involves applying a continuous flow of oil to the chain, pushing it into the chain. This lubrication technique reduces the application temperature of the chain. Also, it can extend the life of the chain, depending on the manufacturer’s specifications.
While the lubrication of roller chain couplings varies by application, sprocket hubs should be lubricated monthly to ensure proper sealing. The amount of oil used depends on the rotational speed and the type of roller chain coupling. In general, lubricants used in roller chain couplings should have excellent adhesion, oxidation, and mechanical stability.
Wear-resistant lubricants are recommended. They prevent the rollers from sticking to each other and prevent rusting. These lubricants have low surface tension and are not harmful to metal or O-ring chains. The optimum lubrication method depends on ambient temperature, horsepower, and chain speed. Properly lubricating a roller chain increases the life of the chain and reduces the risk of wear.
Proper lubrication of the roller chain is essential to prevent corrosion and prolong its service life. The oil forms a smooth film on the chain components, reducing metal-to-metal contact and minimizing friction and wear. Additionally, the oil provides a smooth running surface and reduces noise. However, the running-in process of roller chain lubrication cannot be underestimated. When using heavy-duty oils, ensure that the lubricant is compatible with operating and ambient temperatures.
Maintain
To extend the life of your roller chain, you need to carry out regular inspections. First, you should check the T-pin on the link plate at the joint. If they are not connected properly, it can cause the chain to stretch and not maintain proper spacing and timing. Next, you should look for unusual noise, corrosion, and dirt that may indicate wear. If you notice any of these problems, it’s time to replace the chain.
In order to properly maintain a roller chain, both areas of the roller chain must be lubricated with the correct lubricant. Lubricants used should be SAE non-degreased oils. There are several types of lubricants available, but the best one is a petroleum-based oil with a high viscosity. You can also check for signs of wear, such as red or brown discoloration. This means that there is not enough lubrication.
While the life expectancy of a roller chain is unknown, it is important to know how to extend its life and maximize its effectiveness. Improper tension and alignment can shorten its life and place undue stress on the drive system and the chain itself. Incorrect tension can also lead to slippage and increased energy output. Therefore, you should calculate the tension and alignment of the chain during the initial installation. Check and adjust regularly.
Another way to extend the life of your rollers is to thoroughly clean the inside and outside of the rollers. You should also lubricate it frequently to prevent excessive heat buildup. Designed to prevent overheating by limiting the amount of work during break-ins. Additionally, regular inspections will help you catch anomalies early enough to stop operations. Last but not least, regular lubrication will prolong the life of the roller chain.
Cost
Buying a roller chain is a big decision, but initial cost shouldn’t be the only consideration. The cost of the roller chain itself, as well as the running costs, should be considered. Even the lowest-priced chains can be more expensive in the long run. Additionally, maintenance and energy costs may increase. The best roller chain for your business will be the one that best suits your needs. Listed below are some considerations to consider when purchasing a roller chain.
First, what material should you use? Roller chains come in many different materials. Stainless steel is a commonly used material in construction. Materials are selected based on the cost and design of chain horsepower transmission. Various manufacturing processes will determine which material is suitable for your application. Also, the weight of the chain will vary depending on its pitch and the construction technique used. A large part of the cost of a roller chain is on the drive sprocket.
Another consideration is installation cost. Roller chains are commonly used in agricultural and transportation applications, especially for agronomic products. If lubrication is your concern, maintenance-free chains are the best choice. Corrosion-resistant chains are ideal for wet environments. They are sold in boxed lengths, so replacing a longer length requires adding a shorter length. To avoid trouble, use the skateboard to help connect the links.
Another consideration is the overall width. The overall width of an open #40 roller chain may vary but should be at least 10 feet wide. Although it is not the most expensive type of roller chain, it will last longer. Using it correctly will increase its overall longevity, so it’s a good idea to choose it wisely. If your business uses roller chains regularly, the cost reduction is well worth it.
Application
A roller chain consists of a pair of alternating pins and roller links. The pins are pressed into the side panels and hinged to the rollers. Roller chains can be single or multi-strand, connected by a common pin. The multi-strand design provides higher shear strength for demanding power transmission applications. Typical applications for roller chains include conveyors, hoists, and other mechanical equipment.
The horsepower capability of a roller chain is limited by several factors, including pin shock and friction. While research into these factors has placed some limits on the maximum operating speed of the roller chain, practical experience has shown that these systems can be used at higher speeds. Proper lubrication and cooling can increase the durability of these chains. In addition, roller chain applications include:
Drive and conveyor systems are the two main uses of roller chains. During driving operations, wear and elongation are a natural part of the operation. However, lubrication plays a vital role in minimizing wear and shock loads. Therefore, wear is inevitable and special care must be taken to ensure proper lubrication. Additionally, lubrication reduces heat dissipation in the chain.
The materials used to make roller chains vary from one type to another. Stainless steel is common, but nylon or brass are sometimes used. These materials are less expensive and more durable than steel or stainless steel. The best material for the job depends on a variety of factors, including cost, environmental conditions, and design horsepower transmission. For example, the pin bushing contact area is a critical area requiring lubrication. Additionally, some coatings are designed to retard the corrosive effects of water or oil.
editor by czh 2023-01-08